Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #3: Wed Mar 15 23:35:00 JST 2000
    root@koro.running-dog.net:/usr/src/sys/compile/Koro_4.0_Kernel
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (503.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134152192 (131008K bytes)
avail memory = 126705664 (123736K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 19 -> irq 9
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0340000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia/SGS-Thomson Riva128 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
Timecounter "PIIX"  frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
bktr0: <BrookTree 848A> mem 0xe9001000-0xe9001fff irq 9 at device 9.0 on pci0
Intel Smart Video III/VideoLogic Captivator PCI, <no> tuner.
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xe9002000-0xe90020ff irq 11 at device 11.0 on pci0
rl0: Ethernet address: 00:00:e8:eb:1c:e3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
adv0: <AdvanSys ASC3030/50 SCSI controller> port 0xa800-0xa8ff mem 0xe9000000-0xe90000ff irq 10 at device 13.0 on pci0
adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 16
adv0: driver is using old-style compatability shims
atapci1: <HighPoint HPT366 ATA66 controller> port 0xb400-0xb4ff,0xb000-0xb003,0xac00-0xac07 irq 11 at device 19.0 on pci0
ata2: at 0xac00 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807 irq 11 at device 19.1 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.13> on sbc0
unknown0: <Generic ESDI/IDE/ATA controller> at port 0x100-0x107,0x300-0x301 irq 15 on isa0
unknown1: <Reserved> at port 0x108 on isa0
unknown2: <Game> at port 0x200-0x207 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad4: 19569MB <ST320430A> [39761/16/63] at ata2-master using UDMA66
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad4s2a
cd0 at adv0 bus 0 target 6 lun 0
cd0: <TEAC CD-ROM CD-516S 1.0D> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present